Search
  1. Home
  2. Bar
  3. Aluminum Flat Bar

Aluminum Flat Bar

Aluminum Flat Bar

Aluminum can be recycled an infinite number of times, meaning it is an environmentally friendly metal. We have all sorts of Aluminum Bars such as round bars, flat bars, square bars, hexagon bars, and angle bars. We specialize in bar and bar accessories.

Aluminum Flat Bars are available in a wide variety of shapes. Aluminum alloy has lightweight, excellent electrical conductivity, and high corrosion resistance, which makes it a good material for applications in medical assembly, aircraft construction, and structural and electrical components.

Mechanical Properties

  • Tensile Strength, Ultimate
  • 120 ~ 460Mpa
  • Tensile Strength, Yield
  • 60 ~ 460Mpa
  • Hardness, Brinell
  • 40 ~ 138

Product Specification and Size :

Standard Specification: GB/T6892, ASTM B221, EN754, EN 755

Alloy and Temper
Alloy Temper
2xxx: 2014, 2024 T3, T351
5xxx: 5083, 5754 O, H112
6xxx: 6005, 6060, 6061, 6063, 6082 T5, T6, T66, T651, T6511

Alloy Designation (For Reference)

Comparison of Alloy Designations for Aluminum flat Products

Alloy Series Chinese Standard American Standard European Standard
2xxx Series 2014 2014 EN AW-2014
2024 2024 EN AW-2024
5xxx Series 5083 5083 EN AW-5083
5754 - EN AW-5754
6xxx Series 6005 6005 -
6060 6060 EN AW-6060
6061 6061 EN AW-6061
6063 6063 EN AW-6063
6082 6082 EN AW-6082

Temper Designation (For Reference)

Temper Definition
O Annealed
H112 Slightly strain harden from working at an elevated temperature or from limited amount of cold work
T3 Solution heat-treated, cold worked and naturally aged
T5 Cooled from an elevated temperature shaping process and then artificially aged
T6 Solution heat-treated and then artificially aged
T66 Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through special control of the process (6000 series alloys)
T651 Solution heat-treated, stress-relieved by stretching a controlled amount (permanent set 1% to 3% for rolled or cold-finished rod and bar) and then artificially aged
T3511 Solution heat-treated and stress-relieved by stretching to produce a normal permanent set of 1-1.5%, but not less than 1% nor more than 3%
T6511 Solution heat-treated, stress-relieved by stretching and artificially aged with minor straightening.

Available Size Range

Dimension Range
Width 10mm~600mm
Thickness 3mm~120mm
Length 1,000mm~6,000mm

Application

Aluminum alloy flat bar or aluminum alloy square bar can be widely applied in construction, machinery, electronics, sports equipment, advertising, transportation, consumer goods, furniture, aviation, military, and other application.

- Production Process: Extruded, Cold Drawn
- Form: Rectangle
- Surface Finish: Mill Finish, unless otherwise specified
- Surface Protection: Paper interleaved

Chemical Composition (For Reference)

Chemical Composition conforms to Chinese, American and European standard specification

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others:
Each		 Others:
Total		 Al: Min.
2024 0.50 0.50 3.80~4.90 0.30~0.90 1.20~1.80 0.10 0.25 0.15 0.05 0.15 remainder
5754 0.40 0.40 0.10 0.50 2.60~3.60 0.30 0.20 0.15 0.05 0.15 remainder
5083 0.40 0.40 0.10 0.40~1.0 4.00~4.90 0.05~0.25 0.25 0.15 0.05 0.15 remainder
6060 0.30~0.60 0.10~0.30 0.10 0.10 0.35~0.60 0.05 0.15 0.10 0.05 0.15 remainder
6061 0.40~0.80 0.70 0.15~0.40 0.15 0.80~1.20 0.04~0.35 0.25 0.15 0.05 0.15 remainder
6063 0.20~0.60 0.35 0.10 0.10 0.45~0.90 0.10 0.10 0.10 0.05 0.15 remainder
6082 0.70~1.30 0.50 0.10 0.40~1.0 0.60~1.20 0.25 0.20 0.10 0.05 0.15 remainder